Friday 30 March 2012

living like a rackstar

 I wrote this tut on 30TH  of March ,2012 for julies tutorials
Any resemblance to any other tutorials is purely coincidental.

Supplies needed

You also need paint shop pro,I use version 12
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  Rock on  by  angelsdesignz
template 96  by beth http://BLISSFULLYBETH.BLOGSPOT.COM/
Tube of choice I'm using ISMAEL RAC
you need a license to use this work purchase from HERE 
mask 221 used is by Weescotslass creations
Font of your choice

Lets begin


Open template,delete copyright info

activate each layer,using your magic wand click inside each part
and either choose a color or use a paper from the kit your using



Select all,Copy and paste paper   into selection
Select none,Apply mask
Then Merge group.


go to layers and add a new raster layer and floodfill with write
and drag underneath the mask layer



once you have completed each layer to your liking add some elements from the kit



Copy and paste any elements of your choice or use the ones that i did
And please see my tag for placement of elements

I used these's elements as follows:

Wire
Beaded String
Bow1
Wordart1
Sparkles2
Sucker1
SkullPolish
Skull3
RazorBlade
PianoKeys
Music
GlitterTrail
Doodle2
Flames
DrumSticks





Copy and paste a tube of your choice or use one of the cookies
that come with the kit And resize if needed,i resized mine to 400 pixels





Choose 2 colors to write out your name with a font
Of your choice.



Add any copyrights and watermarks,Merge all layers visible


resize your tag if needed,I always Resize mine to 500 pixels


Go to file>export and save as JPEG or png



Thanks for trying out my tut ,hope you enjoyed it,if you have
Any questions or comments please leave me a comment  :)
 

dark n spooky



I Wrote This Tut On 30th  Of March,2012 For Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro,I use version 12,but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  creeped used  is  by Chichi Designz 
Tube of your choice I'm using a tube  by Dark yarrow
you need a license to use this work purchase from HERE
Mask 222 used is by weescotslass creations
Font of your choice


Lets begin

go to selections>select all
Copy and paste a paper from your kit
right click your tag and copy>paste into selection>Select none

next,go to layers>load/save mask>load mask from disk,choose a mask
and apply it,then merge group


copy and paste Frame1 as new layer and With the magic wand
click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste paper  into selection.
then Select none.


copy and paste a tube of your choice and resize if required


you can start to add the elements to your tag and resize if required and place anywhere
on your tag , i used the following

BarbedWire
Bat
BlackRose
BloodBlade
Bows
Cloud1
Cloud
Wire
Wolf
Crow
GlitterBling
Jewel
Wings
Web
SkullRose






if you have finished adding elements from your kit choose a color or paper
and add your text using a font of your choice

please make sure you add copyright of the tube artist you used or if you used no tube
the scrapkit artists

once all done,merge your tag visible go to resize if you wish


go to file>export and save as a JPEG OR PNG


your all done ,i hope you enjoyed doing my tutorials always remember my tuts are
just a guard for you so have fun,thanks very much hugs from julie x

Lucky

I Wrote This Tut On 30th  Of   March,2012 For Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro,I use version 12,but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit The Clover Fairy  used   is  by  designed by stina
Tube of your choice,i used a poser by medievilcreations ,which comes with the kit
Mask 222 used is by weescotslass creations
Font of your choice


Lets begin

go to selections>select all
Copy and paste a paper from your kit
right click your tag and copy>paste into selection>Select none

next,go to layers>load/save mask>load mask from disk,choose a mask
and apply it,then merge group


copy and paste Frame06 as new layer and With the magic wand
click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste paper  into selection.
then Select none.


copy and paste a tube of your choice and resize if required


you can start to add the elements to your tag and resize if required and place anywhere
on your tag , i used the following


DBS_Bow01
DBS_Clover01
DBS_CloverFlag
DBS_CloverScatter01
DBS_FairyHouse02
DBS_GlitterClover
DBS_Horseshoe
DBS_medi_Fairy05
DBS_Scatter






if you have finished adding elements from your kit choose a color or paper
and add your text using a font of your choice

please make sure you add copyright of the tube artist you used or if you used no tube
the scrapkit artists

once all done,merge your tag visible go to resize if you wish


go to file>export and save as a JPEG OR PNG


your all done ,i hope you enjoyed doing my tutorials always remember my tuts are
just a guard for you so have fun,thanks very much hugs from julie x

Monday 19 March 2012

EggScuse



I wrote this tut on 19th  of March,2012 for julies tutorials
Any resemblance to any other tutorials is purely coincidental.

Supplies needed

You also need paint shop pro,I use version 12
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  Easter Elegance   by  Tootypup Scrap
template  by lovely http://lovelysshack.blogspot.com/
Tube of choice I'm using Jose Cano,i brought this tube when he was at
another store he now sells at the link below
you need a license to use this work purchase from HERE
mask 117 used is by weescotslass creations
Font of your choice 

Lets begin


Open template,delete copyright info

activate each layer,using your magic wand click inside each part
and either choose a color or use a paper from the kit your using 



Select all,Copy and paste paper   into selection
Select none,Apply mask
Then Merge group.


go to layers and add a new raster layer and floodfill with write
and drag underneath the mask layer 



once you have completed each layer to your liking add some elements from the kit



Copy and paste any elements of your choice or use the ones that i did
And please see my tag for placement of elements

I used these's elements as follows:

Bow_01
Butterfly_02
DecoVine_01
Egg
FlowerCluster_01
Heart_03
Rabbit_02
Ribbon_04






Copy and paste a tube of your choice or use one of the cookies
that come with the kit And resize if needed,i resized mine to 400 pixels





Choose 2 colors to write out your name with a font
Of your choice.



Add any copyrights and watermarks,Merge all layers visible


resize your tag if needed,I always Resize mine to 500 pixels


Go to file>export and save as JPEG or png



Thanks for trying out my tut ,hope you enjoyed it,if you have
Any questions or comments please leave me a comment  :)

Wednesday 7 March 2012

Love Love Love

I wrote this tut on 6th of March,2012 for julies tutorials
Any resemblance to any other tutorials is purely coincidental.

Supplies needed

You also need paint shop pro,I use version 12
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  Love Me Tender  by  AngelsDesignz
love love love template   by mythical designs
Tube of choice I'm using ISMAEL RAC
you need a license to use this work purchase from HERE
mask 221 used is by weescotslass creations
Font of your choice 

Lets begin


Open template,delete copyright info



activate each layer,using your magic wand click inside each part
and either choose a color or use a paper from the kit your using 



Select all,Copy and paste paper  7 into selection
Select none,Apply mask
Then Merge group.


go to layers and add a new raster layer and floodfill with write
and drag underneath the mask layer 



once you have completed each layer to your liking add some elements from the kit



Copy and paste any elements of your choice or use the ones that i did
And please see my tag for placement of elements

I used these's elements as follows:

Balloons
Bow2
CandyHeart
Charm
FeatherFan
HeartDoodle
HeartString
Lights
Lips
Roses
Sparkle2
Wordart1





Copy and paste a tube of your choice
 And resize if needed.





Choose 2 colors to write out your name with a font
Of your choice.



Add any copyrights and watermarks,Merge all layers visible


resize your tag if needed,I always Resize mine to 500 pixels


Go to file>export and save as JPEG or png



Thanks for trying out my tut ,hope you enjoyed it,if you have
Any questions or comments please leave me a comment  :)

Sunday 4 March 2012

You Are Everything Too Me (F.T.U)

I Wrote This Tut On 4th  Of   March,2012 For Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro,I use version 12,but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  thats amore  used is A FREE KIT  by  Scraps by Randy's Sin
Tube of your choice I'm using a FREE tube  by  (c)Sheila Craig aka voodoo
she has some wonderful tubes and they are all free
Mask 38 used is by weescotslass creations


Font of your choice


Lets begin

go to selections>select all
Copy and paste a paper from your kit
right click your tag and copy>paste into selection>Select none

next,go to layers>load/save mask>load mask from disk,choose a mask
and apply it,then merge group


copy and paste heartframe3 as new layer and With the magic wand
click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste a paper  into selection.
then Select none.


copy and paste a tube of your choice and resize if required


you can start to add the elements to your tag and resize if required and place anywhere
on your tag , i used the following


bear1
arrow5
bow1
brad3
cupid
rose3
wa6
clip2







if you have finished adding elements from your kit choose a color or paper
and add your text using a font of your choice

please make sure you add copyright of the tube artist you used or if you used no tube
the scrapkit artists

once all done,merge your tag visible go to resize if you wish


go to file>export and save as a JPEG OR PNG


your all done ,i hope you enjoyed doing my tutorials always remember my tuts are
just a guard for you so have fun,thanks very much hugs from julie x

Friday 2 March 2012

Pink Sparkles

I Wrote This Tut On  27th  Of   february ,2012 For Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

You also need paint shop pro,I use version 12,but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

animation shop (for mask)
alienskin xenofex 2 constellation
lokas gel for text

Scrap kit  used 4ever  is  by   Chichi Designz
you can use a tube if you wish too i did not use one
mask 116  used is by weescotslass creations
Font of your choice.



Lets begin
Open a new 700x700 transparent image
Select all,Copy and paste paper   into selection
Select none,Apply mask
Then Merge group.


go to layers and add a new raster layer and floodfill with write
and drag underneath the mask layer


copy and paste Frame1 as new layer and
With the magic wand click inside frame.
Expand selection by 5


Add new raster layer under frame.
Copy and paste paper  into selection.
Select none.




copy and paste a tube of your choice and resize if required ,i did not use one

and then copy and paste the following elements from your kit and
arrange on your tag

WA2
Words
Balloon
Book
Bow1
Brush1
Brush2
Bubbles
Butterfliesglow
Cloud
FireFlies
Flower1
Flower
Flowers
Heart1
HeartBubbles
Ring






Add © info and name,Merge visible
And Resize as needed.


if you want to animate the mask follow me if not save your tag

activate your mask layer and dupicate twice so you have 3 layers

activate your first mask layer go to effects> xenofex 2 >constellation
using theses settings star size 2.55,size variation 83,edge star density 12
overall star density 0,overdrive 100,twinkle amount 75
twinkle rotation 45%,background fill keep original image checked ,press ok

close that layer

activate your second mask layer and copy the above step but press random seed once
press ok

close that layer and activate the 3rd layer and copy the above step

make sure the first mask layer is open close the other 2 layers

open animation shop >right click your tag >copy merged go into animation shop

go to edit>paste as a new animation

back into psp,close the 1st mask layer and open the 2nd>copy merged

back into animation shop>right click the tag and paste after the current frame

back into psp ,close the 2nd mask layer and open the 3rd one repeat the step above

you should now have 3 layers,next go to edit>select all >animation>resize animation to 500 pixels size

view your animation if ok go to file>saves as a gif

and thats it your all done


Thanks for trying my tutorial hope you enjoyed it :)

I Love You


I Wrote This Tut On 27th  Of   February,2012 For Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro,I use version 12,but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit Be My Cupid used  is  by  Jens Sweet Temptations
you can use a Tube if you wish,I used no tube just elements in the kit
Mask  363 used is by weescotslass creations
Font of your choice.


Lets begin

go to selections>select all
Copy and paste a paper from your kit
right click your tag and copy>paste into selection>Select none

next,go to layers>load/save mask>load mask from disk,choose a mask
and apply it,then merge group


copy and paste Frame1 as new layer and With the magic wand
click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste paper  into selection.
then Select none.




you can start to add the elements to your tag and resize if required and place anywhere
on your tag , i used the following

Banner2
Beads
Bear1
BFly1
Bow1
Flower4
CookieBasket
Heart3
Hearts
Petals
Cupcake3







if you have finished adding elements from your kit choose a color or paper
and add your text using a font of your choice

please make sure you add copyright of the tube artist you used or if you used no tube
the scrapkit artists

once all done,merge your tag visible go to resize if you wish


go to file>export and save as a JPEG OR PNG


your all done ,i hope you enjoyed doing my tutorials always remember my tuts are
just a guard for you so have fun,thanks very much hugs from julie x

Love n Kisses

I wrote this tut on 27th  of February,2012 for julies tutorials
Any resemblance to any other tutorials is purely coincidental.

Supplies needed

You also need paint shop pro,I use version 12
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  kickstart my heart   by  designed by stina
template   by Donna designz
Tube of choice, I'm using a cookie © MediEvil Creations,
which comes with the kit
mask 363 used is by weescotslass creations
Font of your choice 

Lets begin


Open template,delete copyright info

activate each layer,using your magic wand click inside each part
and either choose a color or use a paper from the kit your using 



Select all,Copy and paste paper   into selection
Select none,Apply mask
Then Merge group.


go to layers and add a new raster layer and floodfill with write
and drag underneath the mask layer 



once you have completed each layer to your liking add some elements from the kit



Copy and paste any elements of your choice or use the ones that i did
And please see my tag for placement of elements

I used these's elements as follows:

Glitter
Heart03
Bow03
Flower02
Frame01
Keychain03
Kiss02
Rose01
WiredHeart03





Copy and paste a tube of your choice or use one of the cookies
that come with the kit And resize if needed,i resized mine to 400 pixels





Choose 2 colors to write out your name with a font
Of your choice,i added some noise to my text



Add any copyrights and watermarks,Merge all layers visible


resize your tag if needed,I always Resize mine to 500 pixels


Go to file>export and save as JPEG or png



Thanks for trying out my tut ,hope you enjoyed it,if you have
Any questions or comments please leave me a comment  :)

Red Hot


I Wrote This Tut On 27th  Of   February,2012 For Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro,I use version 12,but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  used wild about red  is  by  diane aka candystreats
Tube of your choice I'm using a tube  by   Ismael Rac
you need a license to use his work purchase from HERE
Mask 7 used is by weescotslass creations
Font of your choice


Lets begin

go to selections>select all
Copy and paste a paper from your kit
right click your tag and copy>paste into selection>Select none

next,go to layers>load/save mask>load mask from disk,choose a mask
and apply it,then merge group


copy and paste RedCluster3 as new layer and With the magic wand
click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste paper  into selection.
then Select none.


copy and paste a tube of your choice and resize if required


you can start to add the elements to your tag and resize if required and place anywhere
on your tag , i used the following


WILDthingWordart
RedHeart3
Swirl1
Swirl5
Doublehearts1
Wildred-bg1
RedFlower2
GlitterSplat1
GlitterSplat2
GlitterSplat4
RedHeart4
HeartLine1
ribbon4





if you have finished adding elements from your kit choose a color or paper
and add your text using a font of your choice

please make sure you add copyright of the tube artist you used or if you used no tube
the scrapkit artists

once all done,merge your tag visible go to resize if you wish


go to file>export and save as a JPEG OR PNG


your all done ,i hope you enjoyed doing my tutorials always remember my tuts are
just a guard for you so have fun,thanks very much hugs from julie x