Sweet Emo

I Wrote This Tut On 14th of SEPTEMBER, 2013 for Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro, I use version X5, but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit: Sweet Emotion  is by i dont give a scrap
Tube of your choice: I'm using a tube by verymany
You need a license to use his work purchase from HERE
Mask 297 used is by weescotslass creations


Font of your choice


Let’s begin

Go to selections>select all
Copy and paste a paper from your kit,i used paper23
Right click your tag and copy>paste into selection>Select none

Next, go to layers>load/save mask>load mask from disk, choose a mask
And apply it, then merge group


Copy and paste SEframe2 as new layer and with the magic wand
Click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste paper7 into selection.
Then Select none.


Copy and paste a tube of your choice and resize if required


You can start to add the elements to your tag and resize if required and place anywhere
On your tag, I used the following

SEWordart
SEStar
SEStarBling
SESkullBling
SEShoes
SERibbon
SEribbon2
SEMusicnotes
SELips duplicate so you have 3
SEHeart3
SEGuitar
SEBarbedwire
SEBow
SEFlower5







If you have finished adding elements from your kit choose a colour or paper
And add your text using a font of your choice

Please make sure you add copyright of the tube artist you used or if you used no tube
The scrap kit artists

Once all done, merge your tag visible go to resize if you wish


Go to file>export and save as a JPEG OR PNG


You’re all done, I hope you enjoyed doing my tutorials always remember my tuts are
Just a guard for you so have fun, thanks very much hugs from Julie x

Women At Work

I Wrote This Tut On 5th of SEPTEMBER, 2013 for Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro, I use version X5, but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit:CREW ONLY is by Chichi Designz
Tube of your choice: I'm using a tube by Elias chatzoudis 

                                      You need a license to use his work purchase from HERE

                                           Mask 248 used is by weescotslass creations

                                                           Font of your choice

                                                               Let’s begin

                                               Go to selections>select all

                                        Copy and paste a paper from your kit,i used paper2

                                   Right click your tag and copy>paste into selection>Select none

                          Next, go to layers>load/save mask>load mask from disk, choose a mask

                                                  And apply it, then merge group

                            Copy and paste Element57 as new layer and with the magic wand

                              Click inside frame>go to selections>modify>expand by 5 click ok

                                          Add new raster layer drag under frame.

                                            Copy and paste paper7 into selection.

                                                          Then Select none.

                         Copy and paste a tube of your choice and resize if required

             You can start to add the elements to your tag and resize if required and place anywhere

             On your tag, I used the following

                              Element55.png

                               Element1.png

                              Element2.png

                               Element4.png

                                Element7.png

                                 Element8.png

                                Element11.png

                                Element13.png

                                Element12.png

                                 Element21.png

                              Element22.png

                               Element16.png

                              Element18.png

                                Element30.png

                                  Element31.png

                              Element33.png

                              Element32.png

                              Element44.png

                              Element49.png

If you have finished adding elements from your kit choose a colour or paper

And add your text using a font of your choice

Please make sure you add copyright of the tube artist you used or if you used no tube

The scrap kit artists

Once all done, merge your tag visible go to resize if you wish

Go to file>export and save as a JPEG OR PNG

You’re all done, I hope you enjoyed doing my tutorials always remember my tuts are

Just a guard for you so have fun, thanks very much hugs from Julie x

Beachlife

I Wrote This Tut On 28th of AUGUST , 2013 for Julies Tutorials
Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro, I use version X4, but any version is ok
A knowledge of paint shop pro is needed

Other supplies needed 

Scrap kit  Aquaholic  and it  is by  EvolAngelScrapz
Tube of your choice I'm using one by  Alehandra  Vanhek
Mask 255 used is by Weescotslass creations
Font of your choice


Let’s begin

Go to selections>select all
Copy and paste  paper 2  from your kit
Right click your tag and copy>paste into selection>Select none

Next, go to layers>load/save mask>load mask from disk, choose a mask
And apply it, then merge group


Copy and paste Frame1 as new layer and with the magic wand
Click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.
Copy and paste paper 3 into selection.
Then Select none.


Copy and paste a tube of your choice and resize if required


You can start to add the elements to your tag and resize if required and place anywhere
On your tag, I used the following
Wordart  resize to 90%
Surfboard resize to 80%
Waves
Sun resize to 60%
Sunscreen resize to 35%
Sunglasses resize to 25%
Wordart2
Sparkles1
Sand
PalmTree  resize to 65%
Juice resize to 65%





If you have finished adding elements from your kit choose a colour or paper
And add your text using a font of your choice,I added a gradient glow to my text 

Please make sure you add copyright of the tube artist you used or if you used no tube
The scrap kit artists

Once all done, merge your tag visible go to resize if you wish


Go to file>export and save as a JPEG OR PNG


You’re all done, I hope you enjoyed doing my tutorials always remember my tuts are
Just a guard for you so have fun, thanks very much hugs from Julie x

Purple Heaven

I Wrote This Tut On 15th of   AUGUST , 2013 for Julies Tutorials

Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro, I use version X4, but any version is ok

A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit  Abigaelle used is by  La galerie de Jackie

Tube of your choice I'm using a poser by Designed By K

Mask 247 used is by Weescotslass creations

Font of your choice

Let’s begin

Go to selections>select all

Copy and paste  paper 4  from your kit

Right click your tag and copy>paste into selection>Select none

Next, go to layers>load/save mask>load mask from disk, choose a mask

And apply it, then merge group

Copy and paste  ELEMENT(16).as new layer and with the magic wand

Click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.

Copy and paste paper 5 into selection.

Then Select none.

Copy and paste a tube of your choice and resize if required

You can start to add the elements to your tag and resize if required and place anywhere

On your tag, I used the following

Galeriejackie_KitAbigaelle (14).png

Galeriejackie_KitAbigaelle (12).png

Galeriejackie_KitAbigaelle (13).png

Galeriejackie_KitAbigaelle (11).png remove leaf

Galeriejackie_KitAbigaelle (6).png

Galeriejackie_KitAbigaelle (17).png

Galeriejackie_KitAbigaelle (23).png

Galeriejackie_KitAbigaelle (25).png

Galeriejackie_KitAbigaelle (33).png

Galeriejackie_KitAbigaelle (35).png

Galeriejackie_KitAbigaelle (42).png

Galeriejackie_KitAbigaelle (45).png

Galeriejackie_KitAbigaelle (46).png

Galeriejackie_KitAbigaelle (29).png

Galeriejackie_KitAbigaelle (30).png

Galeriejackie_KitAbigaelle (20).png

I Used a poser that comes with kit instead of a tube dbk-wednesdayCU5.png

If you have finished adding elements from your kit choose a colour or paper

And add your text using a font of your choice

Please make sure you add copyright of the tube artist you used or if you used no tube

The scrap kit artists

Once all done, merge your tag visible go to resize if you wish

Go to file>export and save as a JPEG OR PNG

You’re all done, I hope you enjoyed doing my tutorials always remember my tuts are

Just a guard for you so have fun, thanks very much hugs from Julie x

Lazy Summer Days

I Wrote This Tut On 15th of   AUGUST , 2013 for Julies Tutorials

Any Resemblance To Any Other Tutorials Is Purely Coincidental.

Supplies needed

Paint shop pro, I use version X4, but any version is ok

A knowledge of paint shop pro is needed

Other supplies needed

Scrap kit SANDY TOES,SALTED KISSES used is by  Scraps by Randy's Sin

Tube of your choice I'm using a POSER that comes with the kit

Mask 218 used is by weescotslass creations

Font of your choice

Let’s begin

Go to selections>select all

Copy and paste  paper6  from your kit

Right click your tag and copy>paste into selection>Select none

Next, go to layers>load/save mask>load mask from disk, choose a mask

And apply it, then merge group

Copy and paste frame1 as new layer and with the magic wand

Click inside frame>go to selections>modify>expand by 5 click ok

Add new raster layer drag under frame.

Copy and paste paper 8 into selection.

Then Select none.

Copy and paste a tube of your choice and resize if required

You can start to add the elements to your tag and resize if required and place anywhere

On your tag, I used the following

rs_beauty1

rs_sun2

rs_umbrella1

rs_ball1

rs_bluecrab1

rs_clam1

rs_chair1

rs_beachbag1

rs_bush2

rs_birdofparadise2

rs_drink_pinacolada1

rs_flipflops1

rs_flowers1

rs_gardenia3

rs_mccaw1

rs_shell4

If you have finished adding elements from your kit choose a colour or paper

And add your text using a font of your choice

Please make sure you add copyright of the tube artist you used or if you used no tube

The scrap kit artists

Once all done, merge your tag visible go to resize if you wish

Go to file>export and save as a JPEG OR PNG

You’re all done, I hope you enjoyed doing my tutorials always remember my tuts are

Just a guard for you so have fun, thanks very much hugs from Julie x